TOTAL OSYRIS Y 3000
Anti-corrosion neat oils. It comply with the ISO Standard 6743/8 (1987): category L-RL. Long-term, anti-rust protection of machines and metals, tubes, shafts, bars stored in covered areas, away from the elements. Protection of diverse mechanical parts, gears in casing, gearboxes, etc.
OSYRIX Y 3000 protect parts by coating them with an oily, non-drying film which is both adherent and durable. - High spreading ability, - Minor water-repellent properties, - Good resistance to humid air and acid atmospheres, - Prevents corrosion that may be caused by direct handling of parts, - Recommended protection duration with OSYRIS 3000 is 6 months indoor. This duration depends a lot on the environment of the protected metal, we advise you to test the product on some pieces before validating it technically. OSYRIX Y 3000 may be applied: - by spraying, - by immersion, - by brush or paintbrush. If application is done by immersion, parts may be treated even when hot. • Removal of the protective film: - by solvent (white spirit, distillates, petrol, etc…). wipe away with a cloth soaked in solvent.. immersion and agitation in two successive baths (5 to 30 minutes depending on the thickness of the film and the temperature). - by petrol containing 1 % of commercially available emulgator:. soaking 10 to 30 minutes, draining, washing in hot water, drying. - Alkaline solutions at 85/95°C:. immersion and agitation for 5 to 30 minutes, washing in hot water, drying.. the following may be used for the solution: - silicate of sodium: 0.5 % - trisodium phosphate: 1 % - sodium carbonate: 1 to 2 %