GEAR FLUID 300 is a new half synthetic oil developed for the lubrication of very high powered and low speed gear drive. Its high viscosity at all temperatures boosted with exclusive additives based on bismuth gives it an incredible extreme pressure performance with functional lubricant film from -5°C to+ 110°C. GEAR FLUID 300 is free from solvents, bitumen, chlorine, heavy metals or solid particles and is classified under ANSI/AGMA 9005-E02, Annex D2.
GEAR FLUID 300 is especially indicated for large open gear running with peripheral speed until 10m/s and power which could exceed 2x5000 kW. Is applied on mills and kilns with rotary drum in the raw material industry such as cement, mining and chemical. Direction for use: GEAR FLUID 300 could be applied by bath, paddle wheel, circulation and spray lubrication of the pinion or girth gear drive. It is recommended to heat the distribution systems by temperature below +0°C.On the contrary, it is recommend to cool the fluid when temperatures exceed +110°C (always contact LUBRILOG when out of this temperature range).