PRESSPATE TB

vanaf 13.60 excl. Btw

Product information

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.;In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.;Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.;PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.;Benefits for your application;Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation;Improving process stability for a lower reject rate;Increasing tool life, reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils;Workpieces can be cleaned using conventional cleaning agents and processes

Topkwaliteit
Wij staan voor onze producten
Betalen zoals u wilt
Vooraf, bij levering of achteraf
Snelle levering
Laat uw producten eenvoudig thuisbezorgen
Scherpste prijzen
Met de laagste prijs garantie

can plastic black cap yellow 1 kg

Artikelnummer KL002206
Vanaf 1
1 kg
27,42
/stuk
Vanaf 12
12 kg
26,52
/stuk
Vanaf 24
24 kg
24,86
/stuk

bucket plastic black/yellow 25 kg

Artikelnummer KL002207
Vanaf 1
25 kg
16,71
/stuk
Vanaf 2
50 kg
16,23
/stuk
Vanaf 6
150 kg
15,05
/stuk
Vanaf 12
300 kg
14,79
/stuk

drum st grease black/yellow 180 kg

Artikelnummer KL002208
Vanaf 1
180 kg
13,60
/stuk

Artikelomschrijving

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.;In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.;Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.;PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.;Benefits for your application;Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation;Improving process stability for a lower reject rate;Increasing tool life, reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils;Workpieces can be cleaned using conventional cleaning agents and processes

KLANTREVIEWS
4 out of 5
(0)
Algemene rating ( 0 ) schrijf eigen review

There are no reviews yet.

Be the first to review “PRESSPATE TB”