Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

PRESSPATE SEM 95/800 T

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.;In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.;Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.;PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.;Benefits for your application;Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation;Improving process stability for a lower reject rate;Increasing tool life, reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils;Workpieces can be cleaned using conventional cleaning agents and processes

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.;In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.;Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.;PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.;Benefits for your application;Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation;Improving process stability for a lower reject rate;Increasing tool life, reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils;Workpieces can be cleaned using conventional cleaning agents and processes

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone