Klübertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.;Klübertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc. As the product contains an adhesion additive, some elastomer surfaces no longer require pretreatment (e.g. by primer or plasma). Owing to the many different elastomer types and formulations we recommend carrying out preliminary tests on the original component.;Benefits for your application;High wear resistance, excellent stick-slip and noise reduction behaviour;due to structural surface with embedded hard particles;Less costs and time needed to prepare application because;no filter systems needed due to low VOC content;application onto hot seals up to 180°C possible, no intermediate cooling required;quick drying allows high production speeds;no plasma pretreatment necessary due to integrated adhesion additives;Quick quality control of the coating after the application by integrated UV indicator stimulated at 300-400 nm
Klübertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.;Klübertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc. As the product contains an adhesion additive, some elastomer surfaces no longer require pretreatment (e.g. by primer or plasma). Owing to the many different elastomer types and formulations we recommend carrying out preliminary tests on the original component.;Benefits for your application;High wear resistance, excellent stick-slip and noise reduction behaviour;due to structural surface with embedded hard particles;Less costs and time needed to prepare application because;no filter systems needed due to low VOC content;application onto hot seals up to 180°C possible, no intermediate cooling required;quick drying allows high production speeds;no plasma pretreatment necessary due to integrated adhesion additives;Quick quality control of the coating after the application by integrated UV indicator stimulated at 300-400 nm
