Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

Klubertop TP 15-810

Klübertop TP 15-810 is a black air-drying bonded coating based on polytetrafluoroethylene (PTFE) and an organic water-miscible binder. Klübertop TP 15-810 is a fluid, ready-to-use and non-flammable product. Once applied and hardened, this bonded coating dries rapidly and ensures good resistance to wear and chemicals, a low friction coefficient, no stick-slip at low speeds and good corrosion protection on phosphated surfaces. Its resistance to oils and greases is good.;Adhesion to metals and various plastics is good. Owing to its composition, and due to the fact that heat setting is not required, Klübertop TP 15-810 is particularly suitable for the coating of synthetic materials such as ABS, PC, PVC, PU, PA, PS.;Benefits for your application;Clean, dry wear protection;lifetime wear protection firmly 'rooted' in the surface;no contamination by fluid lubricant;no sticking during automated assembly;Lower costs and less space required during processing;Klübertop TP 15-810 is water-miscible and requires no VOC filter system;cost-efficient mass coating of small parts;fast air-drying – no heat setting required;Higher component performance;very low friction coefficient;no stick-slip;delayed tribocorrosion;good corrosion protection on phosphatized substrates

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

Klübertop TP 15-810 is a black air-drying bonded coating based on polytetrafluoroethylene (PTFE) and an organic water-miscible binder. Klübertop TP 15-810 is a fluid, ready-to-use and non-flammable product. Once applied and hardened, this bonded coating dries rapidly and ensures good resistance to wear and chemicals, a low friction coefficient, no stick-slip at low speeds and good corrosion protection on phosphated surfaces. Its resistance to oils and greases is good.;Adhesion to metals and various plastics is good. Owing to its composition, and due to the fact that heat setting is not required, Klübertop TP 15-810 is particularly suitable for the coating of synthetic materials such as ABS, PC, PVC, PU, PA, PS.;Benefits for your application;Clean, dry wear protection;lifetime wear protection firmly 'rooted' in the surface;no contamination by fluid lubricant;no sticking during automated assembly;Lower costs and less space required during processing;Klübertop TP 15-810 is water-miscible and requires no VOC filter system;cost-efficient mass coating of small parts;fast air-drying – no heat setting required;Higher component performance;very low friction coefficient;no stick-slip;delayed tribocorrosion;good corrosion protection on phosphatized substrates

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone