Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

Klubersynth VR 69-252 N

Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE. With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life. Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. Klübersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.;These benefits help meet all your requirements.;Benefits for your application;Longer component life due to less friction and wear, especially in brass spindle valves.;Prevention of stick-slip at high tightening torques and 500,000 load cycles.;A lubricant for all components meeting all technical, design and chemical requirements, e.g. the German KTW and the French ACS Guidelines.;Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE. With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life. Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. Klübersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.;These benefits help meet all your requirements.;Benefits for your application;Longer component life due to less friction and wear, especially in brass spindle valves.;Prevention of stick-slip at high tightening torques and 500,000 load cycles.;A lubricant for all components meeting all technical, design and chemical requirements, e.g. the German KTW and the French ACS Guidelines.;Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone