Klubersynth UH1 6-100

Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.;Klübersynth UH1 6 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 6 oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.;Klübersynth UH1 6 is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.;Klübersynth UH1 6 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth UH1 6 without prior consultation with the gear manufacturer provided the general application notes are observed.;Klübersynth UH1 6 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil’s high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.;Klübersynth UH1 6 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials, thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product’s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth UH1 6. Leakage and oil contamination are prevented.;The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.;The optimised friction behaviour enabled by the carefully selected base oils based on polyglycol reduces power loss and improves gear efficiency, especially in worm gears. Due to the optimised additives, wear values are reduced and a very low wear intensity according to DIN 3996 (calculation of load capacity of worm gears) is achieved.;Klübersynth UH1 6 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive, etc.;By using Klübersynth UH1 6 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.;* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements;Benefits for your application;Registered as NSF H1 and certified according to ISO 21469;High scuffing protection;Good wear protection for gears and rolling bearings;High micropitting resistance;Good shear stability for reliable lubricant film formation;Optimised for the lubrication of worm gears;Excellent ageing and oxidation resistance;Wide service temperature range due to good viscosity-temperature behaviour;Low foaming tendency;Energy savings due to optimised friction behaviour;Good elastomer compatibility;Approvals by numerous gear OEMs

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.

010-2109798
Pallet vaten van industry lubricants voor smeermiddelen groothandel

5 stuks of meer bestellen? Koop in bulk en bespaar!

Neem contact op met onze klantenservice voor een offerte.

010-2109798
bereikbaar op werkdagen van 9.00 – 17.00 uur

Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.;Klübersynth UH1 6 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 6 oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.;Klübersynth UH1 6 is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.;Klübersynth UH1 6 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth UH1 6 without prior consultation with the gear manufacturer provided the general application notes are observed.;Klübersynth UH1 6 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil’s high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.;Klübersynth UH1 6 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials, thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product’s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth UH1 6. Leakage and oil contamination are prevented.;The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.;The optimised friction behaviour enabled by the carefully selected base oils based on polyglycol reduces power loss and improves gear efficiency, especially in worm gears. Due to the optimised additives, wear values are reduced and a very low wear intensity according to DIN 3996 (calculation of load capacity of worm gears) is achieved.;Klübersynth UH1 6 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive, etc.;By using Klübersynth UH1 6 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.;* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements;Benefits for your application;Registered as NSF H1 and certified according to ISO 21469;High scuffing protection;Good wear protection for gears and rolling bearings;High micropitting resistance;Good shear stability for reliable lubricant film formation;Optimised for the lubrication of worm gears;Excellent ageing and oxidation resistance;Wide service temperature range due to good viscosity-temperature behaviour;Low foaming tendency;Energy savings due to optimised friction behaviour;Good elastomer compatibility;Approvals by numerous gear OEMs

Verpakking

canister tinplate black cap black 1 l, canister plastic black/yellow 5 l, canister plastic black/yellow 20 l, drum st oil black/yellow 200 l

Merk

Klüber Lubrication

Klüber lubricants zijn geschikt voor de gehele industriële sector. Van textiel- tot voedselindustrie en van windenergie tot metaalbewerking. Smeermiddelen zijn niet alleen nodig om aan bepaalde eisen te kunnen voldoen, maar dragen ook bij aan een beter productieproces en een hogere efficiëntie. Smeerolie wordt toegepast op een variatie aan componenten, waaronder schroeven, kleppen, kettingen, tandwielen, kogellagers en lineaire geleidingen. Het is hierbij van belang niet alleen te letten op de eisen voor het betreffende component, maar ook op de eisen die voor het specifieke toepassingsgebied gelden. Uw olie smeermiddelen online kopen? Bij Industry Lubricants bent u aan het juiste adres. Dankzij onze 40 jaar ervaring in het vakgebied bent u verzekerd van een uitstekende service en advies op maat. Neem geheel vrijblijvend telefonisch contact op met de experts op onze klantenservice voor meer informatie over onze producten en hulp bij uw bestelling.
Klantenservice medewerker van Industry Lubricants

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.

info@industrylubricants.com
Mail ons direct

010-2109798
bereikbaar op werkdagen van 9.00 – 17.00 uur