Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

Klubersynth J 44-402

Klübersynth J 44-402 consists of fully synthetic base oil, lithium soap and additives increasing the ageing resistance and the corrosion protection of steel surfaces. Special additives increase adhesion on steel and plastic components, improve the dampening effect between the friction bodies and reduce the breakaway and running torques in ball joints. Klübersynth J 44-402 has been designed to reduce slick-slip and to keep friction values and the difference between static and dynamic friction as low as possible. The usual seal materials like chlorobutadiene rubber (CR) were taken into consideration when developing the grease. Prior to series application we recommend testing the compatibility with the elastomers and plastics used.;Benefits for your application;Low breakaway and running torques even after 24 hours of inoperative position;avoidance of cracking and stick-slip noise;Particularly low friction values;smooth running of joints even with high torsion;Good low-temperature behaviour;consistent smooth operation

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

Klübersynth J 44-402 consists of fully synthetic base oil, lithium soap and additives increasing the ageing resistance and the corrosion protection of steel surfaces. Special additives increase adhesion on steel and plastic components, improve the dampening effect between the friction bodies and reduce the breakaway and running torques in ball joints. Klübersynth J 44-402 has been designed to reduce slick-slip and to keep friction values and the difference between static and dynamic friction as low as possible. The usual seal materials like chlorobutadiene rubber (CR) were taken into consideration when developing the grease. Prior to series application we recommend testing the compatibility with the elastomers and plastics used.;Benefits for your application;Low breakaway and running torques even after 24 hours of inoperative position;avoidance of cracking and stick-slip noise;Particularly low friction values;smooth running of joints even with high torsion;Good low-temperature behaviour;consistent smooth operation

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone