Klubersynth GEM 4-100 N

vanaf 13.55 excl. Btw

Product information

Klübersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klübersynth GEM 4 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.;Klübersynth GEM 4 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth GEM 4 N without prior consultation with the gear manufacturer provided the general application notes are observed.;Klübersynth GEM 4 N offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil’s high micropitting resistance of GFT ≥ 10 according to FVA 54/7 (tested at 90, 60 and 40 °C) offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.;Klübersynth GEM 4 N offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials, thus service intervals can be extended and maintenance costs reduced. The product’s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are statically and dynamically resistant to Klübersynth GEM 4 N. Leakage and oil contamination are prevented.;The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.;The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency.;WECs have been known as a life-reducing failure mode among wind turbine operators, bearing manufacturers and lubricant formulators. Our intensive research and testing activities reveal the excellent protection against WEC provided by the additives contained in Klübersynth GEM 4 N.;Klübersynth GEM 4 N is approved by Siemens-Flender, SEW Eurodrive, Getriebebau Nord, Lenze, Moventas, Bonfiglioli, Rexnord, Hansen, Brevini, Stöber Antriebstechnik, ZAE Antriebssysteme, David Brown, FLSmidth MAAG Gears, etc.;Klübersynth GEM 4-320 N is approved for use in wind power plants by Winergy, Moventas, ZF WP, Bosch Rexroth, ACCIONA ENERGY, and many more.;By using Klübersynth GEM 4 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.;* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements;Benefits for your application;High scuffing protection;Excellent wear protection for gears and rolling bearings;Good shear stability for reliable lubricant film formation;High micropitting resistance;Excellent ageing and oxidation resistance;Wide service temperature range due to good viscosity-temperature behaviour;Low foaming tendency;Energy savings due to optimised friction behaviour;Good elastomer compatibility;Approvals by numerous gear OEMs

Topkwaliteit
Wij staan voor onze producten
Betalen zoals u wilt
Vooraf, bij levering of achteraf
Snelle levering
Laat uw producten eenvoudig thuisbezorgen
Scherpste prijzen
Met de laagste prijs garantie

canister plastic black/yellow 5 l

Artikelnummer KL001562
Vanaf 1
5 l
30,15
/stuk
Vanaf 4
20 l
29,88
/stuk

canister plastic black/yellow 20 l

Artikelnummer KL001563
Vanaf 1
20 l
27,62
/stuk
Vanaf 3
60 l
27,05
/stuk
Vanaf 10
200 l
26,47
/stuk
Vanaf 15
300 l
26,29
/stuk

drum st oil black/yellow 200 l

Artikelnummer KL001564
Vanaf 1
200 l
26,05
/stuk
Vanaf 4
800 l
14,31
/stuk
Vanaf 8
1600 l
13,55
/stuk

Artikelomschrijving

Klübersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klübersynth GEM 4 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.;Klübersynth GEM 4 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth GEM 4 N without prior consultation with the gear manufacturer provided the general application notes are observed.;Klübersynth GEM 4 N offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 (tested at 90, 60 and 40 °C) offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.;Klübersynth GEM 4 N offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials, thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are statically and dynamically resistant to Klübersynth GEM 4 N. Leakage and oil contamination are prevented.;The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.;The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency.;WECs have been known as a life-reducing failure mode among wind turbine operators, bearing manufacturers and lubricant formulators. Our intensive research and testing activities reveal the excellent protection against WEC provided by the additives contained in Klübersynth GEM 4 N.;Klübersynth GEM 4 N is approved by Siemens-Flender, SEW Eurodrive, Getriebebau Nord, Lenze, Moventas, Bonfiglioli, Rexnord, Hansen, Brevini, Stöber Antriebstechnik, ZAE Antriebssysteme, David Brown, FLSmidth MAAG Gears, etc.;Klübersynth GEM 4-320 N is approved for use in wind power plants by Winergy, Moventas, ZF WP, Bosch Rexroth, ACCIONA ENERGY, and many more.;By using Klübersynth GEM 4 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.;* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements;Benefits for your application;High scuffing protection;Excellent wear protection for gears and rolling bearings;Good shear stability for reliable lubricant film formation;High micropitting resistance;Excellent ageing and oxidation resistance;Wide service temperature range due to good viscosity-temperature behaviour;Low foaming tendency;Energy savings due to optimised friction behaviour;Good elastomer compatibility;Approvals by numerous gear OEMs

KLANTREVIEWS
4 out of 5
(0)
Algemene rating ( 0 ) schrijf eigen review

There are no reviews yet.

Be the first to review “Klubersynth GEM 4-100 N”