Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

Kluberplus S 10

The most important element in your manufacturing process is the mould. The longer it can be used without requiring maintenance, the more efficient your manufacturing process will be.;The bonded coating Klüberplus S 10 offers support in this respect by decreasing wear on the mould to reduce preparation costs and increase production output at the same time. This is enabled by the product’s strong release effect and lubricity in casting and forming applications, especially with aluminium alloys.;Spray application of Klüberplus S 10 can be easily integrated into the mould preparation process and leads to a thin but highly resistant separating layer.;Benefits for your application;Significantly longer mould life possible, contributing to lower preparation costs and higher production volumes;Very good adhesion also under demanding operating conditions such as high or alternating loads or shock loads;Very good resistance to abrasion also when applied in a thin layer, enabling manufacture to close tolerances;Spray application facilitates product handling and is easy to integrate into mould preparation process

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

The most important element in your manufacturing process is the mould. The longer it can be used without requiring maintenance, the more efficient your manufacturing process will be.;The bonded coating Klüberplus S 10 offers support in this respect by decreasing wear on the mould to reduce preparation costs and increase production output at the same time. This is enabled by the product’s strong release effect and lubricity in casting and forming applications, especially with aluminium alloys.;Spray application of Klüberplus S 10 can be easily integrated into the mould preparation process and leads to a thin but highly resistant separating layer.;Benefits for your application;Significantly longer mould life possible, contributing to lower preparation costs and higher production volumes;Very good adhesion also under demanding operating conditions such as high or alternating loads or shock loads;Very good resistance to abrasion also when applied in a thin layer, enabling manufacture to close tolerances;Spray application facilitates product handling and is easy to integrate into mould preparation process

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone