Bestel eenvoudig via: 
010-2109798
Offertes en vragen via e-mail
info@industry-lubricants.com
Bestel eenvoudig via 010-2109798

Kluberbio AG 39-602

Klüberbio AG 39-602 is an adhesive lubricant for open gears and steel cables based on ester oil and selected additives. Klüberbio AG 39-602 contains > 60 % of renewable raw materials.;Their biodegradability acc. to OECD 301 F is ≥ 60 % after 28 days. Klüberbio AG 39-602 contributes to long component life and good corrosion and wear protection. The finished product meets the biodegradability, minimally toxic and non-bioaccumulative standards established by the US EPA for the 2013 Vessel General Permit. With its good adhesion to surfaces, Klüberbio AG 39-602 leads to reduced lubricant consumption and reduced labour costs.;Benefits for your application;Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit;Reduced environmental impact in the event of discharge into water. The base oil is derived from renewable resources;Good adhesion and water resistance for long relubrication intervals;Selected additives ensure longer component life and reduced wear;Corrosion protection under seawater influence due to especially selected anti-corrosion additives

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
010-2109798
info@industry-lubricants.com
In bulk kopen?
010-2109798
info@industry-lubricants.com
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen

Artikelomschrijving

Klüberbio AG 39-602 is an adhesive lubricant for open gears and steel cables based on ester oil and selected additives. Klüberbio AG 39-602 contains > 60 % of renewable raw materials.;Their biodegradability acc. to OECD 301 F is ≥ 60 % after 28 days. Klüberbio AG 39-602 contributes to long component life and good corrosion and wear protection. The finished product meets the biodegradability, minimally toxic and non-bioaccumulative standards established by the US EPA for the 2013 Vessel General Permit. With its good adhesion to surfaces, Klüberbio AG 39-602 leads to reduced lubricant consumption and reduced labour costs.;Benefits for your application;Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit;Reduced environmental impact in the event of discharge into water. The base oil is derived from renewable resources;Good adhesion and water resistance for long relubrication intervals;Selected additives ensure longer component life and reduced wear;Corrosion protection under seawater influence due to especially selected anti-corrosion additives

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
010-2109798
bereikbaar op werkdagen van 09:00 - 17 uur
info@industry-lubricants.com
Mail ons direct
© 2023 Industry Lubricants. All Rights Reserved - Fullservice internetbureau Duidelijk Online
envelopephone