Bestel eenvoudig via: 
Offertes en vragen via e-mail
Bestel eenvoudig via 010-2109798


Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
In bulk kopen?
Offerte aanvragen
Bestel nu, snel bezorgd!
Scherpste prijzen, met de laagste prijsgarantie
Veilig online betalen


Performance Features;temperature range: -40 / +70 °C;touch-dry and long-lasting wax film;hardly visible, transparent appearance;reliably prevents the development of corrosion in the long term;preserves tools and machines in ready-to-operate condition;protects bright metal parts against aggressive influences in the air during transportation;can be applied easily and economically, even electrostatically;lubricates well, does not have to be removed before the parts are put into operation;Description;DECORDYN 350 is a transparent and liquid anticorrosion product when being processed, which, after the evaporation of the solvent, forms an adhesive protective film. This film also has good lubrication properties and does not have to be removed before the parts are used. DECORDYN 350 can also be applied by an electrostatic spraying process. A salt spray test was performed with coating thicknesses of 18, 35 and 50 µm. The test was aborted after 672 h. Corrosion could not be determined on any of the test sheets with a coating thickness of 35 µm.;Field of application;DECORDYN 350 is used for the storage of machine parts, plastics injection moulds, casting moulds, punching, stamping, bending and drawing tools which have to be stored temporarily but must be ready for use all the time. For bright machine parts and devices e.g. sliding guides, guide rails, clamping and alignment surfaces, which have to be reliably protected against corrosion before shipment. For intermediate storage of valuable semifinished parts in a corrosive environment. Subject to the number of applications, the treated parts can be stored between 6 and 36 months.;Method of application;DECORDYN 350 can be applied by spraying conventionally or electrostatically, immersion or with a brush onto dry surfaces. In case of extremely strong corrosive influences it is recommended to increase the thickness of the protective film by repeated applications onto each dry film. During application be sure to have good ventilation. Application from a spray can is possible without any problems, as DECORDYN 350 Spray.

Service en specialistisch advies

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
bereikbaar op werkdagen van 09:00 - 17 uur
Mail ons direct
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer