Bestel eenvoudig via 010-2109798
Bestel eenvoudig via 010-2109798

Castrol Tribol GR 1350-2.5 PD

Een bestelling plaatsen of hulp nodig?

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.

Top kwaliteit

Wij staan voor onze producten

Scherpste prijzen

Met de laagste prijsgarantie

Snelle levering

Korte levertijden, snelle bezorging

Veilig betalen

Duidelijke afspraken en order bevestiging

Artikelomschrijving

Castrol Tribol™ GR 1350-2.5 PD (previously called Optipit™) is a lithium soap based grease with an extremely high viscosity base oil containing the advanced MicroFlux Trans (MFT) additive package. The Microflux Trans additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying micro-smoothing of the friction surfaces. Under severe load, components of the MFT additive combination are activated and diffuse into the surfaces, initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds with excellent lubricity and adhesion. This means that the load carrying area is improved and that a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a non-sacrificial micro-smoothing of the friction surfaces.;Advantages;Water and dirt repellent – the grease is still effective in adverse environments;High load bearing capacity - enables the extension of operationg periods even under high loads whilst still maintaing optimum wear protection.;Establishes a protective layer of MFT – this additive system can effectively increase the load bearing area, therefore reducing unit pressures, operating temperatures and wear which can increase service life of both parts and lubricant;Improved bearing surfaces for longer service life result from the ‘running in’ effect of MFT;Extremely low coefficients of friction – energy savings and reduced noise levels;Good adhesion due to high oil viscosity – the film coating stays on the surface;Reduction of running-in period

Wij staan klaar om u te adviseren. Bel of mail ons en wij komen zo snel mogelijk bij u terug.
Neem contact op
© 2020 Industry Lubricants. All Rights Reserved - Duidelijk Online website bouwer 
envelopephone